Talos Principle 2: All puzzles in Megastructure Act 2 Talos Principle 2 guide, puzzles

Having trouble solving the Megastructure puzzles in Act 2 of Talos Principle 2? This page of our guide explains how to reach the blue and green laser puzzles.

Last update: 27 November 2023

This page of the Talos Principle 2 guide contains solutions to all puzzles in the Megastructure in Act 2. Additionally, you'll find a step-by-step instruction how to get through the maze in the Megastructure and how to find the puzzles.

• Blue laser beam
• Green laser beam

Blue laser beam

After going through the door, which Byron will open for you, turn right and then left.

You will reach a golden gate. Arrange the Tetrominos blocks to proceed further.

Climb the stairs to the very top and jump onto the anti-gravity wall.

Walk on the anti-gravity walls and jump down to the ground. Go up the stairs until you come across the next golden gate.

After arranging the blocks, turn left and you will see the entrance to the puzzle in the distance. Arrange the next blocks to create a path.

1. Take the accumulator and charge it with a red laser.
2. Connect the accumulator to the red button.
3. Pick up the inverter.

1. Connect the inverter to the blue button and place it on the platform.
2. Add the accumulator to the connection.
3. Go further and pull the lever.

Green laser beam

After activating the blue laser beam, leave the puzzle and return through the golden gates. Go down the stairs and turn right.

Go down the stairs until you come across the next golden gate. Arrange the blocks and proceed further.

The green light on the wall will indicate the direction where you should go. Arrange the blocks at the next golden gate and move forward on the anti-gravity wall. Behind the next golden gate, you will find the entrance to the puzzle.

1. Pick up a connector and replace it with a driller.
2. Make a hole in the wall.
3. Take out the inverter through the hole.

1. Replace the driller with the connector.
2. Make a connection between the red laser and the red button.
3. Lift the inverter and make a connection between the connector and the blue button.
4. Pick up a jammer.

1. Use the jammer to deactivate the barrier in front of the green laser on the wall.
2. Replace the inverter with a driller.
3. Make a hole in the next wall, revealing the green button.

1. Pick up the connector and break the connections.
2. Make a connection between the green laser and the green button.
3. Pull the lever and activate the green laser beam.